Part 7: Mysterious Metal from Bottom of Wedge-Shaped UFO — Update 1996-2018 Research

0
1779

Part 7: Mysterious Metal from Bottom of Wedge-Shaped UFO — Update 1996-2018 Research

“The bismuth/magnesium-zinc alloy is an electrogravitic rectifier. You energize it in order to cause it to rectify gravitational field energy — unidirectional force, one direction, based upon how you have the material oriented. And when the Bi/MgZn material is being energized, along with the other structure of the craft — the structure of the craft really negates gravitational energy from penetrating. In other words, it becomes weightless.”

– Whistleblower Physicist, February 2, 2017

Return to Part 1.

Whistleblower Physicist Speaks for First Time About UFO Bi/MgZn

This Part 7 is new to my Earthfiles reports about my investigations of the Bismuth/MagnesiumZinc layered metals. The following interview transcript is from my recorded interview on February 2, 2017, with a whistleblower physicist, who requests anonymity. He contacted me to say he had been following my efforts to investigate the Bi/MgZn since 1996, and wanted me to know that he had worked with a large “skin” of the same layered metal underground at Area 51, Nevada, in the 1970s.

But the physicist said he worked on a slab of the layered metal that was 6 feet long and 3 feet wide! That, he said, was the outer skin that covered the entire wedge-shaped craft, not just the underside. The key he stressed was the inner skin of pure aluminum that has “mono-iridium atoms intelligently placed at the atomic and sub-atomic level of the inner skin.”  It’s the combination of the two parallel skins that disconnects the craft from Earth’s gravity, inertia and atmosphere.

 

Interview on February 2, 2017 – 1970s Area 51 Physicist Speaks Anonymously

“The magnesium-zinc alloy is an electrogravitic rectifier. You energize it in order to cause it to rectify gravitational field energy — unidirectional force, one direction, based upon how you have the material oriented. And when the Bi/MgZn material is being energized, along with the other structure of the craft — the structure of the craft really negates gravitational energy from penetrating. In other words, it becomes weightless.

So, from that is no inertia, it’s essentially weightless. It takes very little energy to push it around. So when it’s in that state, that’s when you can push it around with electrogravitic material. So you strengthen it in the direction that you want to activate the electrogravitic material. Otherwise, it balances out all the way around and you are neutrally buoyant. You are just floating there.

But when you strengthen the field in any given direction, you change the amount of electrogravitic force in that particular direction.

What you have is a package of special state materials. In order to use the Bi/MgZn materials you have, you first need the structure of the craft, which is made of aluminum (99% pure), which is 20% by weight monatomic-iridium (one atom) disbursed throughout the aluminum in a crystalline pattern. When you energize that with the drive energy, it blocks gravity field energy from interacting with the aluminum structure and anything within that structure. So the craft becomes weightless. You can push it around very easily. What you have — the layered magnesium-zinc alloy with bismuth — that is an electrogravitic rectifier.

In other words, as it is energized, it wants to move in a particular direction based upon the orientation of the layers that were put on the outside of the craft. That’s the outer skin of the craft. You can apply energy to the entire craft up to a point where it is not affected by gravity at all. It has no inertia. It has no weight, no mass. You can push it around.

Then you reinforce energy stronger where you want the electrogravitic level of energy to change. It will be neutrally buoyant up to the point where you apply more energy in one direction and less energy in the other direction and you get an effect where the craft is pushed and pulled at the same time.

And because the craft has no inertia, it’s just like it has no weight. So it takes very little energy to push it around.

 

Are Terahertz Frequencies the Key?

Terahertz radiation – also known as submillimeter radiation, terahertz waves, tremendously high frequency (THF), T-rays, T-waves, T-light, T-lux or THz – consists of electromagnetic waves within the ITU-designated band of frequencies from 0.3 to 3 terahertz. 1 THz = 1012 Hz.Terahertz radiation – also known as submillimeter radiation, terahertz waves, tremendously high frequency (THF), T-rays, T-waves, T-light, T-lux or THz – consists of electromagnetic waves within the ITU-designated band of frequencies from 0.3 to 3 terahertz. 1 THz = 1012 Hz.

Now, the material has to be literally bombarded with non-Hertzian energy from terahertz frequencies. It cannot be electromagnetic. It has to be pulses, very fast pulses, very fast transition times. Modern electronics cannot achieve this. Generators have to be designed specifically for this application. If someone tries to use an off-the-shelf component to build a terahertz generator, I don’t think he is going to be able to do it. But I built one.

Linda:  DID YOU BUILD YOURS TO GENERATE THE NON-HERTZIAN FREQUENCIES?

Yes. And I used technology that was discovered by Nicolai Tesla. He called it non-Hertzian energy.

CAN YOU EXPLAIN WHAT NON-HERTZIAN ENERGY IS TO A LAY AUDIENCE?

Alright, non-Hertzian means it is not comprised of sine waves. It is not alternating phases of electromagnetic energy, electrical and magnetic.

You have to strip out the magnetic so it is electric pulses only. And they have to be like digital ON and OFF very rapidly. You’re talking about Femto seconds or faster rise times and fall times. And our modern electronics cannot achieve that.

SO HOW DID TESLA DO THAT?

Tesla did it electromechanically. He literally used contacts. Commutators. Spark gaps. That’s the entire key to being able to do wireless transmission of power. It’s not done with electromagnetics. It’s not done through magnetic induction. Even his coils and transformers were not formed to use the magnetic field. He matched mass, primary and secondary mass, in order to get coupling.

If the layered metal is subjected to magnetic fields, it will make the monatomic iridium leave and then the layered metal won’t work. Magnetic fields will ruin the layered metal material. So all the experimentation to this date from 1996 that you have reported about would make the monatomic iridium leave, so none of the tests tried so far would work. Also, in the Army guy’s first letter dated April 10, 1996 (Part 1), it says:  ‘The Dimensional Powerplant was self-destructed, and the inter-atmospheric propulsion system also deactivated to prevent the technology from falling into the hands of the Terrans (humans).’

IF WE HAD PERFECT BISMUTH/MG-ZN LAYERED METAL, WOULD IT BE WHAT WAS IN THE CRAFT AT LEAST ONE CRASH  WHERE 6=FINGERED HANDS WERE IMPRINTED IN A PANEL IMPLYING THAT THE  BEING AND ITS MIND WERE CONNECTED TO THE CRAFT THROUGH THE FINGERS AND THE HANDS TO CONTROL THE CRAFT?

Yeah, they had fiber optic studs at the fingertips and the fibers went back to the control system. The fiber optics run between the inner pure aluminum and monatomic iridium and the outer skin of the Bi/MgZn.

WHAT WAS THE LINK BETWEEN THE MIND, THE HANDS, THE IMPRINTED PANELS AND THE PURE ALUMINUM SKIN AND THE LAYERED BI/MG-ZN? HOW DOES IT ALL WORK TOGETHER?

The control system is what drives everything. All they have to do is direct it through their finger action on the control panel. The control system, which I would call their ‘flight control computer’ would interpret those and provide the necessary drive energy to the various sub-systems of the entire craft.

ARE THEY WORKING, CONTROLLING, LITERALLY WITH THEIR MIND?

I don’t know. I really couldn’t answer that because all I had to work with was the materials that were recovered to be analyzed. So how it operated within the alien craft, I couldn’t tell you because the aliens detonated the power plant prior to crashing.

TO SELF-DESTRUCT.

Yes, they used fluid and didn’t want it falling into our hands. And they didn’t think we would be able to figure out the special state materials making up the craft. And for a long time, we did not. We were going about it wrong because we tried to analyze it using standard VCR spectroscopic analysis. It can only be done if you use the sheath gas so you can extend the burn times to keep the electrodes from burning away. Once you extend the burn time, then you’re able to overload the monatomic-iridium materials and cause them to drop out of their high-spin state.

When they drop out of high spin state, they give out a proton of gamma radiation and then they start charging back up again. Only at that time when it drops out of high spin state can it be read.

 

Terahertz Frequencies Are the “Drive Energy” of UFOs

SO IS IT THE BISMUTH/MAGNESIUM-ZINC LAYERED SKIN THAT IS EMITTING THE TERAHERTZ FREQUENCY THAT CAN DAMAGE HUMAN TISSUES AND MANIPULATE HUMAN MINDS?

It’s actually the drive energy that is going through the material, penetrating and radiating out from the craft.

CAN YOU EXPLAIN THAT IN MORE DETAIL?

No, I can’t.

BECAUSE?

We’re delving into highly classified areas here.

BUT WE KNOW HOW TO WORK WITH THE BISMUTH/MG-ZN SKIN NOW AND ARE ALSO WORKING WITH ALUMINUM THAT HAS MONO-IRIDIUM IN IT?

Yes, and that information has leaked out over the years. But there are weapons technologies that are based on what you were just discussing and I can’t get into it because those are active weapons systems.

GOING BACK TO THE CRAFT, THE WAY THEY WERE DESCRIBED IN DOCUMENTS IS THAT THEY WERE WEDGE-SHAPED WITH NO FLAT SURFACES — SWOOPY CALLED ‘PLANFORMS’ — AND THAT THE BI/MG-ZN WAS ALL OVER THE BOTTOM OF THE WEDGE-SHAPED CRAFT?

It was all over the craft, not just on the bottom!

 

Physicist Saw Wedge-Shaped UFO Craft

July 1947 wedge-shaped UFO based on July 1947 military eyewitness illustrations.July 1947 wedge-shaped UFO based on July 1947 military eyewitness illustrations.

HAVE YOU PERSONALLY SEEN ONE OF THE EXTRATERRESTRIAL WEDGE-SHAPED CRAFT WITH THE BISMUTH/ MG/ZN SKIN INTACT/

Yes. More like the shape of a flattened egg. It’s more pointed at the front than it is at the rear. It’s an elongated, pointed oval.

AND WHAT DID YOU SEE? CAN YOU GIVE US DETAILS ABOUT WHAT YOU WERE SEEING IN THIS CRAFT BECAUSE YOU WERE STUDYING THE BI/MG-ZN MATERIAL?

In that one, I was inspecting the craft and I really can’t get into that because it’s never been declassified.

WAS THE BI/MG-ZN THEN NOT JUST ON THE BOTTOM, BUT ALL THROUGHOUT THE ENTIRE SKIN OF THAT CRAFT?

Yeah, the only place it wasn’t was where the port holes were.

HOW MANY BEINGS COULD THAT TYPE OF CRAFT ACCOMMODATE?

I’m speculating, but there were two flight positions. That’s pretty much all I can tell you.

TWO.  DID YOU SEE THE BEINGS THAT WERE IN THAT CRAFT?

No.

DID YOU SEE PHOTOS?

No.

DID SOMEONE DESCRIBE FOR YOU WHICH TYPE WAS IN THERE?

No, all I saw was after I left I saw some stuff on the Santilli film. I never actually saw any alien beings. I was a scientist who worked on technology.

 

UFO Control Panels with Embedded 6-Fingered Hands

BUT YOU DID SEE THE PANELS WITH THE 6-FINGERED IMPRINTED HANDS?

Yes. A thumb and five fingers.

SIX, AND THAT MATCHES THE SANTILLI FILM FROM 1995. I VISITED HIM IN LONDON AND TALKED WITH HIM ABOUT AN INTERVIEW WITH THE MILITARY CAMERAMAN.

I personally went into the craft, so my observations are what I saw when I was inside the craft.

 

CAN YOU DESCRIBE WHAT YOU SAW AND IF THERE WERE ANY SYMBOLS OR HIEROGLYPHS?

Yes, there were, but they are not visible until you remove the inspection covers. I can’t get into that, because that particular aspect of what I worked on was never declassified.

I HAVE PHOTOGRAPHS THAT WERE GIVEN TO ME BY SANTILLI IN LONDON WITH PERMISSION THAT SHOW SYMBOLS ON BEAMS AND WHEN I DID A SEARCH OF MY OWN GOING TO ALL THE ANCIENT LANGUAGES OF EARTH, THEY MATCHED ANCIENT GREEK.

I wouldn’t doubt that.

The alleged 1947 U. S. Army film of UFO crash debris near Socorro, NM, contained this I-beam with symbols that resemble ancient Greek letters.The alleged 1947 U. S. Army film of UFO crash debris near Socorro, NM, contained this I-beam with symbols that resemble ancient Greek letters.

DO YOU HAVE ANY INSIGHTS ABOUT THE MATCH OF ANCIENT GREEK TO THE SYMBOLS INSIDE OF THESE CRAFT IN WHICH THE SKIN IS THE BISMUTH MAGNESIUM-ZINC LAYERED METAL?

I can’t do that. I can’t give that information out publicly.

BUT YOU DO HAVE KNOWLEDGE?

Yes.

AND IT IS FAIR TO SAY THAT THE GREEKS WERE PROBABLY ANOTHER INTELLIGENCE BASED ON THIS PLANET AND NOT EVOLUTIONARY HOMO SAPIENS?

I can’t say that (laughs), I’m sorry, I can’t delve into that.

WELL, I’VE BEEN TOLD IN THE LAST TWO YEARS THAT IS IN FACT THE TRUTH.

I can say this much – there have been more advanced civilizations on this planet prior to us that were far more advanced than we are today.”

 © 1998 – 2019 by Linda Moulton Howe.

All Rights Reserved.

Return to Part 1.

Earthfiles welcomes other information from viewers. All requests for confidentiality are honored. Please email earthfiles@earthfiles.com.

Also see:

• 07/05/2014 — Part 2: Met Boeing Engineer Who Knew About UFO Bi/Mg Metal

• 07/01/2014 —Part 1: Peruvian Interacts with Small, Grey Being

 

Earthfiles welcomes other information from viewers. All  requests for confidentiality are honored. Please email earthfiles@earthfiles.com.

LEAVE A REPLY

Please enter your comment!
Please enter your name here